Solar street lamps all kinds photovoltaic cell components is introduced

Company production of various models between 30 wp - 300 wp photovoltaic cells components, power output of the company's products strictly control in the plus or minus 3%, in order to ensure that every product is positive tolerance. Our components through international laboratory testing, ensure the accuracy of the output rate of the male. In the component

company production of various models between 30 wp - 300 wp photovoltaic cells components, power output of the company's products strictly control in the plus or minus 3%, to ensure that every product is positive tolerance. Our components through international laboratory testing, ensure the accuracy of the output rate of the male. In component production process, we use the high light transmittance of toughened glass encapsulation and sealed waterproof junction box, ensure that components use safety. We guarantee that our pv modules during the 10 years to use, power output is above 90%; During the life of 25 years, the output power at more than 80%. Characteristics of raw materials: cell: adopting the high efficiency ( 17. More than 5%) Monocrystalline silicon solar encapsulation, ensure sufficient solar panels generate electricity power. USES low iron tempered glass: suede glass ( Also known as the white glass) , the thickness of 3. 2 mm, in solar cell spectral response range of wavelengths ( 320 - 1100nm) Light transmittance over 91%, for more than 1200 nm infrared light with high reflectivity. The glass and radiation ability of the sun's ultraviolet light, light transmittance is not falling. Solar panels are EVA: adopt and ultraviolet resistant agent, antioxidant and the thickness of the curing agent is 0. 78 mm high quality EVA film as sealant of solar cell and and the connection between the glass, TPT agent. With high light transmittance and anti-aging ability. Solar panels TPT: battery cover on the back of the sun - Fluorine plastic film is white and reflection of the sun, so the efficiency of the component increased slightly, and because of its high infrared emissivity, also can reduce the working temperature of components, also is helpful to improve the efficiency of the component. Of course, the fluorine plastic film first solar cell encapsulation materials required by the aging resistant, corrosion resistant, airtight etc. Basic requirements. Frame: aluminum alloy frame with high intensity, mechanical shock resistance ability.