ALLTOP Solar Powered Outdoor Waterproof Lights Road Stud LED Reflector

Technical Parameter:

Product material: die-cast aluminum

Product specifications: 105 * 105 * 23MM 0.30KG / piece

Power supply method: Solar battery (polysilicon) 0.3W 2V / 150mAh

Energy storage device: a rechargeable battery 1.2V / 600mAh NI-MH high temperature resistant battery

Display mode: flashing (2Hz ± 20%) and steady light

Display color: yellow, red, blue, white, green, amber, etc. or customized wavelength color

Display device: φ5 super bright anti-fog LED

Visible distance:> 1000 meters

Service life: effective use> 3 years

Working environment: -20 ℃ ～ + 70 ℃

Waterproof rating: IP67

Start control light intensity: the front light is less than 80Lux

Product certification: CE, ROHS

Compression resistance: 20T

Features:

The mold is formed at one time, and the carrying capacity exceeds 20 tons.

 Fully flashes continuously for 200H or steady 40H

Extremely waterproof, solar panels, electronic components and LEDs are sealed in the housing by special technology, and can be used normally for long-term water accumulation on the road.

High efficiency imported polycrystalline silicon solar panels, the conversion rate can be as high as 17%.

The service life is 3-5 years.

Easy to install, just fix with epoxy glue or screws

Application Scenario:

1. A road section with more than four lanes back and forth, but no isolation zone in the middle and insufficient light at night;

Solar LED road stud

2. At the intersection / zebra crossing (deceleration prompt);

3. Sharp turn roads;

4. Misty zone (seaside, airport road);

5. Highways and roads without street lights;

6. Location of guide lines at elevated and tunnel entrances and exits;

7. Vehicle shunt (around triangle ground);

8. Railway ramp crossing;

9. Toll station lane line;

10. Locations where accidents occur frequently;

11. Urban sidewalks, park paths, and other areas and roads that need to beautify night scenery.