Philips lighting, industrial lighting solutions tailor-made for you

Lighting, improve people's quality of life not only, still can be in the industrial fields of social wealth gives the indirect value. In industrial production, often accompanied by extreme temperature, pollution and vibration characteristics of the technological process, such as might be to light up, operation and maintenance of the lighting system with 'normal' the special requirements of different working conditions. Over the years, global technology leader, philips lighting has been committed to providing tailor-made for various industrial applications of professional lighting solutions, it has a series of complete high quality industrial lighting system can meet the requirements of industrial production. 'Tailor-made'

high efficiency and energy saving of lighting system in industrial production of the special environment on the operation stability of the lighting system put forward very high requirements, the need for specific environmental design lighting system. Especially in iron and steel plant, lamps and lanterns is often work under the environment of high temperature, the higher the position of the average temperature is higher. And heavy dust in the workshop and water mist, if not enough protection, easy to make the efficiency of lamps and lanterns down very fast. Also need to use some of the area of the plant volatile component of acid treatment on the surface of the steel plate, can cause corrosion of lighting equipment. In addition, is widely used in industrial workshop is large, medium power metal halide lamp, the attenuation of lamps and lanterns and life is also very important two aspects. In philips service industrial users, there is a large domestic iron and steel enterprises. The enterprise only from the maintenance of lamps and lanterns to replace original convenience and use the ballast mercury lamp and incandescent lamp and the light, not only meets the requirement of the stability of industrial lighting, and power consumption, low efficiency, become the 'soft rib' which restrict the development of the enterprise.

in considering plant all kinds of environmental factors, the philips for the iron and steel company chose has a high resistance, high temperature resistant, corrosion resistant high quality lamps and lanterns, and use the light source of the attenuation quite gentle, preferably in industrial workshop long time to open it. In addition, considering the iron and steel industry requires not only large general lighting factory, also need to be in the operation of the equipment parts and parts of the test set a large number of local lighting, lighting energy saving become the enterprise and the most direct way. Philips lighting designers find workshop there are quite a few vents and daylighting window, you can try to use the form of natural light during the day, all the lamps and lanterns is only in the evening is opened entirely, can reduce the power consumption, achieve the goal of energy saving. Of course, in this way would switch number of lamps and lanterns is more, to the frequent switch performance of lamps and lanterns has certain requirements, and the high quality products of philips just can do it. As a result, despite the lighting system although purchase cost has increased, but the high quality lighting and excellent mechanical equipment, to reduce operating costs and maintenance costs, the earnings will be obtained in a short period of time than the initial additional investment.

'adjust measures to local conditions' cloth lamp lighting system maintenance easier

in the industrial lighting system through scientific concept, energy-efficient lighting, also need to lamps and lanterns for careful and regular maintenance and maintenance, this will help to improve the effectiveness of the lighting system and service life. But because involves the structure of the workshop, workshop, industrial lighting system maintenance in the field of far more complex than life lighting, often according to the actual environmental conditions to form special maintenance. Such as the lighting system in the reconstruction project of the iron and steel enterprises, philips according to the characteristics of different plants, adopted three kinds of luminaires. At the same time of guarantee high quality lighting effect for lighting system maintenance easier. The project is involved in building steel structure workshop, height of 18 to 30 m, only through the top of the line maintenance obviously doesn't work directly with their lamps. Therefore, at the top and bottom line frame of driving distance is not too big in the workshop, install the lamps on the top of the vehicle can be within the scope of operation, to maintain the lamps and lanterns with driving the top; At the most inconvenient maintenance position, use the lamps and lanterns is lifting system maintenance; Convenient use lift car maintenance workshop, the condition of the ground can be multiple workshop Shared one or a few, on the top of the building installation of lamps and lanterns structure did not demand too much, easy to operate. In the industrial design of cloth lamp lighting system, philips lighting is often by considering each workshop layout and characteristics of the adjust measures to local conditions using a variety of cloth lamp to all of the lighting system is more simple and convenient maintenance.

in today's global energy increasingly nervous, industrial energy saving of lighting system is the trend of The Times. High quality industrial lighting not only can well meet the extreme environments of industrial production, reduce energy consumption, and more comfortable visual environment helps to improve the staff's production enthusiasm, thus improve the productivity, reduce errors, nonconforming product and accident, significantly alleviate the long work fatigue, eventually add more value for the enterprise.

editor: China lighting network/leaves