Lithium battery solar light pole production technology and solar street lamps mainly

Solar street light light pole production process including a, lofting design light pole baiting size according to customer requirements, and reasonable planning blanking style and size. Avoid wasting two, under shear shearing machine will be adopted according to the layout size of material, at this time to pay attention to check size,

solar production process consists of a light pole. According to customer requirements, design light pole baiting size, the cutting method and reasonable planning of size. Avoid waste a second, according to the size of lofting, cutting and cutting blanking the shears. At this point, check the size, the operation should be safe. Three, bending. Bending is one of the key working procedure in the production of light pole. Cutting and blanking plate through bending processing. The initial forming and bending quality directly affects the quality of light pole, unable to repair after bending forming. Operation and test should be carried out in strict accordance with the drawings and technical process. 4. Welding. Is to bend straight weld seam welding fixed shape. Submerged arc welding is mainly used in automatic welding, the key is to guarantee the straightness of the component. Now, many manufacturers began to use automatic welding robot, the effect is quite good five. Repair and polishing. After grinding is for automatic welding of tube billet defects repair. After soldering, should inspect weld and repair welding and grinding for defect parts. Sixth, plastic surgery. Forming process including lamp straightening and round at the ends of the blank column and polygon diagonal dimension, to ensure that the lamp of straightness. Seventh, hand in hand. Aligned on both ends of the light pole, to ensure the light pole end flush, nozzle perpendicular to the centerline. Eight, welding flange and floor at the bottom of the light pole. Nine, manufacture install wiring door operation. Ten, galvanized. Galvanizing is the key to the corrosion process, must ensure that the coating thickness and smoothness of zero defect. Eleven, plastic spray. Should the color according to the needs of customers, in order to ensure that the anticorrosive performance of light pole and beautiful. Some solar lamp students have no production equipment according to the traffic light.