Light in use process need to do maintenance work

With the continuous development of society, now high lamp are common in our life, we often can see the light in some outdoor places, because the lamp is used outdoors, so in the process of use will be affected by many factors, in the use of failure, in order to enable it to have longer service life, high lamp manufacturer to advise people in use process, must do the daily maintenance of it, to ensure that its service life is longer. To make high lamp usage is better, there must be in the usual time to light more inspections.

a, want to inspection on black metal components, see hot dip galvanized anti-corrosion effect is very good, see the appearance of seam welding is relatively good, whether there is corrosion, if found the problem, must be replaced in a timely manner.

2, to see if some of the fastening parts did locking processing, to some of the fastening bolts on the bracket of lamps and lanterns to check, also check at the time of installation, light pole is vertical, rod slightly perpendicularity error can not be more than three over one thousand, light pole linear error can not be more than two over one thousand, its precision is very high.

3, to make light, long service life, also need to check the lamp panel of the machine, as well as inspection on lamp plate mechanical strength, also need to check its heat loss, to ensure that the lamp plate is safe in use, and can have longer service life.

4, inner wires to the lamp panel also want to check to see how capacity of the wire, whether there is aging, line, and so on and so forth, if discovered the case, must be timely to deal with wire.

to enable high lamp when used to show the good performance, high lamp manufacturers suggest users in the process of use, must do a good job in the daily maintenance to ensure that in use process will not appear larger fault.