How to use AWorks light an LED lamps - China lighting network

AWorks is ZLG spent 12 years developing the next generation of embedded development platform, support component 'pluggable, alternative, configurable', users only need to modify the corresponding header file, can be realized 'programming at a time, a lifetime, cross-platform use', this article to introduce the AWorks light an LED lamps simple routines, take you feel AWorks charm! 1, the introduction of core board M1052 crossover core board onboard architecture M7 RT1050 processor, already have strong processing performance of the MPU, and MCU microcontroller simple and easy to use with the advantage of real time! M1052 integrated WiFi/LoRa/ZigBee/Mifare wireless capabilities, and pre-installed AWorks real-time operating system, intelligent hardware and the design of industrial application direction of the Internet of things. M1052 core board 2, AWorks AWorks lit LED process this routine we used the Eclipse development environment and hardware assessment in bottom as shown Eclipse development environment hardware backplane AWorks development environment construction in the we provide CD data AWorks M1050 SDK quickstart document

V1. 01 'document section 2 has introduced in detail, the data in the ZLG contributions of science and technology, zhiyuan electronic website can be downloaded for free, here is no need to do. Below we from two aspects: hardware and software to introduce how to light an LED lamps. 3, the hardware circuit is introduced LED lamp circuit diagram M1052 core board schematics M105x - control LED lamp interface pin EV - Connect the LED lights on Board floor is the core Board B42 pin, the pin can reuse UART2 receive signals, USB_OTG1_OC, QTIMER3_TIMER3 and at this time we do not unlock the function of reuse, the pin value as an ordinary GPIO1_IO19 use.

12 page full remaining

zhiyuan electronic