How much money a set of 13 w solar street light

The solar street light on rod is appropriate primary use value, therefore, the solar street lamp manufacturers produce rod stud processing aspect also is to have the requirement. Solar street light pole is made of steel, raw materials for the international standard low silicon q235 low carbon and high strength, thickness

solar street light is appropriate to the requirement of pole and main utilization value, thus for solar pole lamps manufacturers, processing requirements and regulations. Solar energy lamp posts for steel, raw material is q235, low silicon, low carbon, high strength, thickness 5 mm, the bottom flange thickness is 16 mm. Calculate the proportion of the bottom of the stem and root structure, structure, according to the user to determine the shape and structure parameters of manufacturer, according to the seismic fortification level 6 and 8 wind. After solar monitoring stick upright, with theodolite check good two-way straightness, straightness error is 1. 0. The vertical of the rod to the tapered structure, anise conical rod without deformation and distortion. The roundness of the rod body specification of 1. 0 mm. 。 Surface lubrication is common, and there is no transverse weld. Leaf blade scratch test ( 25 square millimeters) 。 Coating layer adhesion is strong, not easy to fall off. Seal stud, top seal to prevent moisture to enter, waterproof leakage within the method is reliable. Light pole shape and size to meet user requirements, the exterior is harmonious, beautiful and easy, uniform color, steel pipe diameter is reasonable. All welding rod welding process without welding, weld formation, no welding defects, after galvanized passivation treatment, coating adhesion, thickness of 65 mm. Choose the high quality plastic powder.