|
|
| ||
Item NO | 5025A100-01 | 5025B120-01 | 5025C150-01 | 5025D180-01 |
Power | 100W | 120W | 150W | 180W |
Light Source | Bridgelux Chip or Customized | |||
Lamp Size | 350*310*90mm | 392*350*90mm | 475*350*90 mm | 556*350*9mm |
Led Life Span | 50000 hours | |||
Color rendering index | Ra≥85 | |||
Power factor | PF≥0.96 | |||
Rated life | ≥50000 Hours | |||
Color temperature | 3000k-7000k | |||
Working temperature | -30℃~+50℃ | |||
Material | High quality Die-casting Aluminium | |||
Input Voltage | AC 90-265V 50/60HZ | |||
Beam angle | 180° | |||
IP code | IP65 | |||
Warranty | 3yesrs |
Embedded petrol station light, Easy to install and use. It is suitable for the lighting of large ceilings such as gas stations, underground garages, subway stations, large supermarkets, and large warehouses.
High safety factor, Moisture proof, anti-corrosion, waterproof, etc.
Imported LED light source, High heat conductivity, low luminous decay, pure light color and no ghosting. Life span longer than 50000 hours.
Made of high quality die-casting aluminum alloy, it has the characteristics of fast heat dissipation, waterproof and anti-corrosion.
Integrative design for heat sink and housing; The LED is closely connected to the surface.
Led canopy light suitable for the lighting of large ceilings such as gas stations, underground garages, subway stations, large supermarkets, and large warehouses.
Muti-Color Diode 6*2W 12W RGBWYV RGBWYUV High Power RGBWYP 6 in 1 LED Chip
Electrical/Optical Characteristics
Power(W) | Color | Wavelength | Luminous Flux(LM) | Voltage(V) | Current (mA) | ||
(W) | WLD(NM) | Min | Max | Min | Max | ||
5*2W | Red | 620-630NM | 60LM | 80LM | 2.0V | 2.6V | 500mA |
Green | 520-530NM | 100LM | 130LM | 3.0V | 3.6V | 500mA | |
Blue | 460-470NM | 30LM | 50LM | 3.0V | 3.6V | 500mA | |
White | 6000-8000K | 130LM | 160LM | 3.0V | 3.6V | 500mA | |
Yellow | 585-595nm | 60LM | 80LM | 2.0V | 2.6V | 500mA | |
Purple | 395-430nm | 20LM | 40LM | 3.0V | 3.6V | 500mA |
Our Services:
Contact Us:
1- Addressable RGB Pixel LED Strip, IC inserted in 5050RGB diode;
2- 30LEDs 30ICs per meter, each led can be cut, there is cut lines every 33.3mm;
3- 15cm 3PIN JST SM male&female connector on both end for signal transfer and extra two wires for power feeding;
4- Black& White PCB for optional, non-waterproof IP20 with 3M adhesive tape at back side, waterproof with silicon tube casing IP65;
5- Protocol: SD card controller, Artnet, Ardunio and so on.
Please Note:
>> WS2812B is the old version, SK6812 is the updated version with better function;
>> DC5V & DC12 for optional with 60LEDs/m;
>> All can be customized, such as length, wires, connectors, LED Qty per meter, PCB thickness....etc.
Model | SJ-10030-SK6812 |
Length | 1m |
IC Chip | WS2812B/SK6812/WS2811 |
LED | SMD 5050 |
LED qty | 30 pcs per meter |
IC qty | 30 IC /m |
Power | 9W |
Input | DC5V |
Waterproof | IP20/IP65/IP66/IP67 |
Angel | 160° |
Controller | SD controller,Artnet,Arduino |
- Decorative lights for holidays, events, shows, exhibition
- Path & contour marking
- Architectural lights for canopy, corridor, window, archway
- Backlight or edge lighting for signage
- DIY lights for home use
- Use with aluminum rigid channels and turn the led strip to linear fixtures.