Complimentary Samples for you and Technical Consultation at your convenience
Latest products
What are the main uses of multifunctional street light poles
by：ALLTOP
2021-04-13
In our days, the types of street lamps seen in different regions are also different. As for the high-pole lamp, its shape is more atmospheric, the lighting plan is wider, and the all-round illumination can be used at night. To give pedestrians more light, what are the tasks that need to be prepared before the equipment operation of the high-pole lamp? The person in charge of the high-pole lamp manufacturer summarizes some of the work processes before and after the high-pole lamp equipment.
Regarding the high pole lamp, its height has a plan, ranging from 15 meters to 30 meters. The pole will use polygons, generally there will be 8 sides, 12 sides, 16 sides, and pin pull rods. Plug-in structure, common products will be 20 meters, 25 meters, and 30 meters. The upper diameter, lower diameter, light pole section, upper section wall thickness, and lower section wall thickness are different, and generally will be Plan according to practical needs. For the poles of high pole lights, hot-dip galvanizing and plastic spraying treatment will be used, which is suitable for city squares, stations, ports, parking lots, stadiums and other places.
The preparatory work before the equipment of high pole light equipment
1. First check the loading and packing list, carefully check whether all the components are complete, check whether the parts are damaged, and if they are damaged, replace the parts in time. This is very important. Assuming that these problems are discovered after the equipment is completed, whether it is replacement or repair, it is more complicated. Therefore, after checking the equipment before the equipment, the work effect will go a lot. Each part on the light pole will indicate the type of the pole body. Assuming that it does not match, it needs to be replaced. Otherwise, the next operation will be more troublesome.
2. The operation of the equipment, regarding the length and size of the equipment socket at each splicing place. In the process of the equipment, certain faults simply occur. For convenience and quickness, appropriate force should be applied at both ends of the socket to obtain a tight socket. In this process, we must not only pay attention to the close connection of equipment, but also ensure our own safety. After all, safety is our top priority in all construction.
Regarding the high pole lamp, its height has a plan, ranging from 15 meters to 30 meters. The pole will use polygons, generally there will be 8 sides, 12 sides, 16 sides, and pin pull rods. Plug-in structure, common products will be 20 meters, 25 meters, and 30 meters. The upper diameter, lower diameter, light pole section, upper section wall thickness, and lower section wall thickness are different, and generally will be Plan according to practical needs. For the poles of high pole lights, hot-dip galvanizing and plastic spraying treatment will be used, which is suitable for city squares, stations, ports, parking lots, stadiums and other places.
The preparatory work before the equipment of high pole light equipment
1. First check the loading and packing list, carefully check whether all the components are complete, check whether the parts are damaged, and if they are damaged, replace the parts in time. This is very important. Assuming that these problems are discovered after the equipment is completed, whether it is replacement or repair, it is more complicated. Therefore, after checking the equipment before the equipment, the work effect will go a lot. Each part on the light pole will indicate the type of the pole body. Assuming that it does not match, it needs to be replaced. Otherwise, the next operation will be more troublesome.
2. The operation of the equipment, regarding the length and size of the equipment socket at each splicing place. In the process of the equipment, certain faults simply occur. For convenience and quickness, appropriate force should be applied at both ends of the socket to obtain a tight socket. In this process, we must not only pay attention to the close connection of equipment, but also ensure our own safety. After all, safety is our top priority in all construction.
Custom message
