Solar street lamp lithium battery activation method

With the advancement of science and technology, solar street lights have begun to be widely used in rural road construction. They are energy-saving, environmentally friendly, green and clean, safe and durable. However, after the installation of solar street lights is completed, sometimes the problem of not turning on the lights may be encountered. The reason for this problem is mainly due to the automatic protection function of the solar street light lithium battery. At this time, we need to activate the solar lithium battery. The following editor will talk about its activation method.


1. Unplug the LED light source cable and connect only the solar panel to see if the indicator light is green. If the solar lithium battery indicator light is green, we can proceed to the next step.
2. At this time, connect the LED light source again to see if the light source is on or not. If it is not on, then check whether the solar lithium battery indicator is green. If it is green, unplug the solar panel wiring and connect only the LED light source wire. . If the solar street light is on and the indicator light of the solar street light lithium battery is red, it means that the solar street light lithium battery is activated normally, and then the solar panel can be connected at this time.


The above is the activation method of solar street light lithium battery. However, the solar system is composed of LED light source, solar battery panel and solar battery, so the solar street lamp does not light up after installation, it may be due to the failure of the LED light source and solar battery panel. If you want to learn more about the solution to the problem of solar street lights not turning on, you can read the article written by the editor before about 'What to do if solar street lights do not turn on after installation'. The content inside will have a great impact on everyone using solar street lights. help.