Small professional shockproof flood light【KH211】

Small professional shockproof floodlight [KH] Year, month, day, the new year is coming, this KH shockproof zoom lamp uses high-efficiency MH gas discharge as the light source, and the average service life is more than hours. The two lighting functions of projecting and flooding can be switched at will, and the lighting angle can be adjusted in a larger range from top to bottom, and the condensing distance is more than m. It adopts multiple anti-vibration structure design with superior anti-seismic performance and can be used reliably in various high-frequency vibration environments. It adopts environmentally friendly lightweight alloy materials and high-tech spraying technology, dustproof, waterproof, corrosion-resistant and rust-proof, suitable for long-term outdoor work. Good electromagnetic compatibility, will not cause interference to the transmission network. Various installation methods such as seat type, wall-mounted, ceiling, etc. can be selected at will, and the operation is simple and convenient. [KH] How to use: After determining the appropriate installation location and method according to the needs of the site environment, install and fix the lamp with expansion bolts. , Use a screwdriver to open the junction box cover on the back of the electrical box, loosen the Gülen connector, and pass one end of the cable into the Gülen connector. According to the polarity marked on the junction box, connect the neutral, live and ground wires to the corresponding On the terminal, tighten the Gellen connector, fix the junction box cover, and then connect the other end of the cable to the V power supply. , [KH] Loosen the lamp cap locking screw at one end of the lamp bracket to adjust the illumination angle of the lamp cap in a larger range from top to bottom; turning the dimming knob can realize the free conversion of spotlight and floodlight. , [KH] Fine-tuning the dimming knob, which can improve the condensing and flooding effects, and can be inserted into the two round holes of the fine-tuning nut with needle-nose pliers to tighten it. , [KH] When replacing the bulb, use a screwdriver to loosen the fixing screw on the back cover of the lamp holder to take out the lamp holder, replace the new bulb and then close the back cover and fix it.