LED street light pole design specifications and standards-ALLTOP-img
loading
MORE

LED street light pole design specifications and standards

by:ALLTOP      2021-04-13

The overall LED street light has specific specifications and standards before design. Whether it is LED street lamp heads, driving power supplies, LED street lamp poles and embedded parts, they all have design specifications and standards. These must meet the normal specifications and standards, so that the LED street lights can be used normally and safely. Today, the editor will mainly talk about the design specifications and standards of LED street light poles.

.Wall thickness:
The wall thickness of the light pole refers to the thickness of the steel plate used when making the light pole. Common specifications are mm, .mm, .mm, mm, and .mm.
.Round rod, vertebral rod:
The conventional types of street light poles include round poles and tapered poles. Round poles refer to the same upper and lower calibers. They are commonly used in occasions where the height of the pole is not high. Cone poles refer to the upper and lower calibers. On higher occasions, the vertebral rod has better mechanical strength and wind resistance than the round rod.
. Wind resistance level:
The wind resistance level of the light pole is directly related to the height and wall thickness of the light pole. We can design according to the different requirements of customers to meet the corresponding wind resistance requirements of the customers.
.Conventional light poles are coiled and welded with Q hot-rolled steel plates. After hot-dip galvanizing, they have good corrosion resistance and oxidation resistance. After the surface is sprayed, the corrosion resistance and oxidation resistance are further improved. Ability, the lamp pole after hot-dip galvanizing and plastic spraying has a service life of more than one year.
.The wall thickness of the street light pole should not be too small, because the light pole wall thickness that is too small will cause uneven roundness during the rolling process, which will affect the overall aesthetics and mechanical properties of the light pole, and the wall thickness of the light pole is too thick Thickness will increase the weight of the light pole and increase the cost. Therefore, when choosing a light pole, the lighter the lighter the better when meeting customer requirements.
.The diameter of the lamp arm is mostly mm, mm size, which can ensure the smooth installation and reliable fixation of the lamp. If the lamp arm requires a special size, it is necessary to add a reducing sleeve for the fixed installation of the lamp.
.When designing the wind resistance level of street light poles, you should know the basic information of the upper and lower diameter of the light pole, the wall thickness of the light pole, the size of the wind resistance, the height of the light pole, the material of the light pole, etc. You also need to know the length of the light arm and the battery Only by parameter information such as the size of the panel, the angle of the battery panel, the presence or absence of a wind generator, the size of the lamps, etc., can the wind resistance level design be more comprehensive, so as to fully ensure that it can meet customer requirements.


Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...