Corrosion protection measures of landscape lamp manufacturers

1. The damaged zinc layer must be repaired for landscape lights, which can be done with zinc-rich paint. u003cbru003e u003cbru003e2. Under normal circumstances, the landscape light pole body should not be welded on site. When welding is unavoidable, the galvanized layer of the welded part should be ground off before welding, and the damaged zinc layer must be repaired after welding. u003cbru003e u003cbru003e3. Welding will produce a lot of sparks, welding slag, and the smoke on the surface of the zinc layer is also very dangerous. Ensure the safety of personnel u003cbru003e u003cbru003eLandscape light manufacturer u003cbru003e u003cbru003eLandscape lighting features: u003cbru003e u003cbru003e 1. The lighting quality is good, creating a daytime lighting effect. By adjusting the distribution of lamps and lanterns, uniform illuminance can be obtained, and glare can be reduced or avoided. By adjusting the power and quantity of the lamps, the ideal illuminance can be obtained. u003cbru003e u003cbru003e u003cbru003e 2. The pole position is far away from the road (beyond 1Om), it is convenient to install and maintain, does not affect the traffic, and avoid traffic accidents such as pole collision. u003cbru003e u003cbru003e u003cbru003e 3. It can save ground space and reduce the repetition of light pole cables and infrastructure consumption. Suitable light source for high pole lighting: The high pressure sodium lamp of 250W—I 000W is economical. In occasions with high color rendering requirements, such as stadiums, airports, and squares, high-power white metal halide lamps can also be selected. u003cbru003e u003cbru003e u003cbru003eLandscape lighting structure description: u003cbru003e u003cbru003e u003cbru003e 1. Lifting system: Built-in automatic lifting structure, reducer adopts worm gear type, self-locking motor, self-locking function and double protection, designed lifting load up to 15KN, using hook type fixed lamp panel, stable and safe reliable. u003cbru003e u003cbru003e u003cbru003e u003cbru003e 2. Light pole: high-quality steel plate with a thickness of 6mm-12mm is used; it is bent and formed by a large-scale CNC bending machine at one time without transverse welds. After hot-dip galvanizing the inner and outer surfaces, the outer surface is electrostatically sprayed, which is beautiful and durable. The rod type is plug-in multi-prismatic taper rod or conical rod (mostly multi-prismatic taper rods), with low center of gravity, good mechanical stability, and convenient construction and installation.