How much solar panel can meet family electricity?
One square-meter solar power board can generate 150-160W power. About 20 square meters of Pacific Plate can be used for daily use of inverter loss about 80%of the power.
MORE
【Z-NFC9123】 Brief introduction of LED flood light
by：ALLTOP
2021-04-07
【Z-NFC 】A brief introduction of LED flood light
ZNFC LED flood light is widely used in the cabins, cargo spaces, walkways, tunnels and various indoor lighting of factories, stadiums, docks, billboards, buildings, parking lots, warehouses, ships, trains and other large facilities use.
Technical parameters of ZNFC LED flood light: Rated voltage ACV/DCV/DCV; Rated power: -W; Color temperature is white, warm white, and sun yellow; Luminous flux lm/W (Puri chip); Ambient operating temperature- ~°; Anti-corrosion grade WF; protection grade: IP; size according to power configuration; power supply protection over voltage, over current, short circuit; total weight according to power configuration.
.High-efficiency and energy-saving Under the same brightness, LED energy-saving lamps consume only one kilowatt-hour of electricity per hour, ordinary incandescent lamps consume 1 kilowatt-hour of electricity per hour, and ordinary energy-saving lamps consume 1 kilowatt-hour of electricity per 100 hours.
.Long Life The theoretical life of LED super energy-saving lamps can reach more than tens of thousands of hours, and the lifespan of ordinary incandescent lamps is more than hours.
.Light health The light does not contain ultraviolet rays and infrared rays, no radiation, no pollution. Ordinary energy-saving lamps and incandescent light rays contain ultraviolet rays and infrared rays.
.Green environmental protection does not contain harmful elements such as mercury and lead, which is beneficial to recycling and utilization, and will not produce electromagnetic interference. Ordinary lamps contain harmful elements such as mercury and lead, and electronic ballasts in energy-saving lamps will produce Electromagnetic interference.
. Protect eyesight uses DC power drive, no flicker, ordinary lights are AC driven, it will inevitably produce flicker, which is harmful to the eyes for a long time.
.High light efficiency and low heat generation. 90% of the electric energy is converted into visible light. Only 20% of the electric energy of ordinary incandescent lamps is converted into visible light. The other 80% of electric energy is converted into heat, which is a great waste of limited resources.
. High safety factor requires less voltage and current, less heat, no safety hazards, and can be used in dangerous places such as mines.
ZNFC LED flood light is widely used in the cabins, cargo spaces, walkways, tunnels and various indoor lighting of factories, stadiums, docks, billboards, buildings, parking lots, warehouses, ships, trains and other large facilities use.
Technical parameters of ZNFC LED flood light: Rated voltage ACV/DCV/DCV; Rated power: -W; Color temperature is white, warm white, and sun yellow; Luminous flux lm/W (Puri chip); Ambient operating temperature- ~°; Anti-corrosion grade WF; protection grade: IP; size according to power configuration; power supply protection over voltage, over current, short circuit; total weight according to power configuration.
.High-efficiency and energy-saving Under the same brightness, LED energy-saving lamps consume only one kilowatt-hour of electricity per hour, ordinary incandescent lamps consume 1 kilowatt-hour of electricity per hour, and ordinary energy-saving lamps consume 1 kilowatt-hour of electricity per 100 hours.
.Long Life The theoretical life of LED super energy-saving lamps can reach more than tens of thousands of hours, and the lifespan of ordinary incandescent lamps is more than hours.
.Light health The light does not contain ultraviolet rays and infrared rays, no radiation, no pollution. Ordinary energy-saving lamps and incandescent light rays contain ultraviolet rays and infrared rays.
.Green environmental protection does not contain harmful elements such as mercury and lead, which is beneficial to recycling and utilization, and will not produce electromagnetic interference. Ordinary lamps contain harmful elements such as mercury and lead, and electronic ballasts in energy-saving lamps will produce Electromagnetic interference.
. Protect eyesight uses DC power drive, no flicker, ordinary lights are AC driven, it will inevitably produce flicker, which is harmful to the eyes for a long time.
.High light efficiency and low heat generation. 90% of the electric energy is converted into visible light. Only 20% of the electric energy of ordinary incandescent lamps is converted into visible light. The other 80% of electric energy is converted into heat, which is a great waste of limited resources.
. High safety factor requires less voltage and current, less heat, no safety hazards, and can be used in dangerous places such as mines.
Custom message
Related Products
