The temptation and maintenance of lamps to make home can not be ignored

The temptation and maintenance of lamps to make home should not be ignored [HC Hardware Network] Lamps and lanterns play an important role in our lives. How can a room without light have the power to attract us to go home? For the hero who created the 'temptation to go home'-lamps, we should take care of them carefully and keep the warmth that moves us. Let's share some tips for lighting maintenance. **. Look at the manual. After buying the lamp, do not be busy installing it. You should carefully read the marking of the lamp and read the installation manual, and then install and use the lamp according to the manual, otherwise it may be dangerous. **. If there is a problem, replace it in time. Replace the aging lamp tube in time according to the light source parameters provided by the sign. If the two ends of the lamp tube are red, the lamp tube is black or dark, or the lamp does not light up, the lamp should be replaced in time. Prevent unsafe phenomena such as the ballast from burning out. Third, do not change the structure of the lamp. During cleaning and maintenance, you should be careful not to change the structure of the lamp, and do not change the parts of the lamp casually. After the cleaning and maintenance, you should install the lamp as it is, and do not miss or wrongly install the lamp. part. Fourth, do not switch frequently. Try not to switch frequently when using the lamp, because the current through the filament is greater than the current during normal operation at the moment of frequent start of the lamp, which makes the temperature of the filament rise sharply and accelerate sublimation, which will greatly reduce its Service life, so it is necessary to minimize the switch of the lamp. Fifth, correct maintenance The lamp must be maintained during use in order to extend its service life. The lamp tubes in the room should be wiped with a dry cloth frequently, and attention should be paid to prevent moisture intrusion, so as to avoid rust damage or leakage and short circuit after a long time; the lamps installed in the toilets and bathrooms must be equipped with moisture-proof lampshades, otherwise the service life will be greatly shortened; Lamps installed in the kitchen should pay special attention to preventing oily fume, because the accumulation of grease will affect the brightness of the lamp; light-colored lampshades have better light transmittance, but they are easy to stain, so they should be wiped diligently to avoid affecting the light penetration; If it is non-metal, wipe it with a damp cloth to prevent dust from accumulating and affecting the lighting effect. Humidity can easily cause the lamps to rust and peel off paint, and also shorten the life of the lamps. Therefore, moisture-proof is the key to maintenance of lighting, especially the lamps in toilets, bathrooms, and stove headlights in kitchens. Moisture-proof lampshades must be installed to prevent moisture intrusion and avoid rust damage or leakage short circuits. Do not clean the lamp with water. Just wipe it with a dry cloth dampened with water. If you accidentally touch the water, try to wipe it dry as much as possible. Do not wipe it with a wet cloth immediately after turning on the light.