【 Technology sharing 】 LED lights use requirement dynamic | | industry lighting: solar LED street lamp manufacturers in the countryside

LED street lamp is manufacturer can't casually is produced, is professional manufacturer specializing in the production of LED street lamps, according to the reasonable design, the correct use, if have what do not pay attention to, are likely to affect the LED street lamp lighting effect. The LED lights use requirements? First LED lights pick arm should not be more than a quarter of the installation height of if pick spent long arm length, it is can reduce the brightness of the lighting side kerbstone and sidewalks ( Intensity of illumination) ； Second, high mechanical strength requirements of cantilever, and may be the cause of lamps and lanterns and light source vibrates, affect their service life, third, affect beautiful, causing the cantilever and the ratio between light pole not harmonious, four is cost will increase, so the cantilever length shoulds not be too long. The direction of the maximum intensity of LED street light lamps and lanterns and lamps and lanterns down vertical axis Angle in 0 & ndash; 65° Between, lamps and lanterns of maximum intensity projection direction and the vertical Angle should not be more than 65 & deg; , the theoretical design light distance = tg65 & times; The height of the light pole & times; 2, according to the characteristics of the new rural construction is slightly difference, but the gap is too big.