【SBF6220】Waterproof, dustproof and anticorrosive floodlight, factory lighting

【SBF】Waterproof, Dustproof and Anticorrosive Floodlight Factory Lighting


[SBF] Waterproof, dustproof and anticorrosive floodlights are suitable for floodlighting indoor and outdoor places such as factories, tunnels, airports, docks, stations, buildings, squares, stadiums, etc.


【SBF】Technical parameters of waterproof, dustproof and anticorrosive floodlight: rated voltage: v; light source: induction lamp/metal halide lamp/sodium lamp; rated power: W/W/W; working current: .A; luminous flux: Lm/Lm/Lm; protection class: IP; anti-corrosion class: WF; cable outer diameter: φ~φmm; external dimension: **mm; weight: Kg.





.This lamp is waterproof, dustproof and anticorrosive factory lighting equipment SBF waterproof, dustproof and anticorrosive floodlight


.The lamp shell is made of aluminum alloy casting with high tensile strength and low copper content (less than .%), with good corrosion resistance, and the surface of the shell is sprayed with polyester.


.The lamp is a two-cavity integral structure, and the light source cavity and the electrical cavity are separated independently. The adjustable metal bracket can adjust the projection angle of pitch degree.


.The lamp adopts flat toughened glass light-transmitting board, which has strong impact resistance, high light transmittance and good heat resistance.


.The lamps are made of cables or explosion-proof interference pipes, which are safe and reliable. The explosion-proof joint surface is equipped with rubber sealing ring so that the lamp has better waterproof performance at the same time.


.High-intensity gas discharge lamp is used as the light source, which has high luminous efficiency and long life. It can be used with different reflectors to achieve multi-purpose lighting; and after softening treatment, it will not cause people to dazzle or other uncomfortable reactions. The ballast adopts overheating protection technology to ensure the service life of the lamp. Imported high-purity mirror-faced aluminum anodized material is used as the reflector and adopts an excellent light distribution design, with a power factor greater than ., high reflective efficiency, good light transmission, energy saving and environmental protection.


.This lamp is suitable for bracket installation.