The height of a high pole lamp is generally greater than a meter, and it is composed of the lamp holder, the internal lamp electrical, and the base part of the pole. The high-pole lights illuminate a wide area, and are mainly suitable for large and wide venues such as squares, stations, docks, freight yards, highways, stadiums, and overpasses. We can configure the number, height and power of high pole lights according to the size and nature of the site. According to the needs, you can choose the lamp panel automatic lifting, climbing ladder and other facilities to facilitate maintenance.
Preparatory work to be done before installation of high pole lights:
. Carefully count all the components according to the delivery list.
.Check whether the components are damaged, bent, twisted, and whether the zinc layer is damaged.
.The signs on each rod body indicate the type of rod body, order number, and number of sections. The weight of the shaft is marked with a colored pen on the inside of the shaft. Check whether the delivery is correct and whether the crane lifting capacity is sufficient.
. According to the maximum and minimum socket length provided on the drawing, mark on the rod body for socketing.
Installation of high pole lights:
.Each splice provides a socket length, but due to the influence of manufacturing, installation errors and physical factors, there are changes in socket length, so the maximum socket length and the minimum socket length are provided.
. In order to facilitate installation, it may be necessary to lubricate the mating surface. Be careful not to use lubricating oil to prevent leakage and contamination of the rod body. You can lubricate the inner and outer surfaces of the sleeve with soapy water.
.. When socketing, apply necessary force at both ends to obtain a tight socket.
Finally, LED
street light manufacturers suggest that you pay attention to the wall thickness of the pole when buying high pole lights. Because the market is becoming more and more competitive, many unscrupulous businesses often cut corners and lower standards on street light poles in order to obtain more profits. In the event of a typhoon, high-pole lamps with small wall thickness are likely to be blown down, which will seriously affect people's travel safety.
