Introduction to technical parameters of LED wall lamp with strong shock resistance and earthquake resistance

LED wall lamp is a lamp that uses light-emitting diodes as the light source to be installed on the wall or furniture wall to become an LED wall lamp. Traditional wall lamps mostly use halogen lamps, which have low luminous efficiency, relatively power consumption, increased temperature of the irradiated environment, and short service life. LED is far superior to traditional lighting products in terms of light-emitting principle, energy saving and environmental protection. Moreover, the unidirectionality of LED light has formed a pair of wall lamps with LED wall lamps. Lamps that use light-emitting diodes as light sources are installed on walls or furniture walls to become LED wall lamps. Traditional wall lamps mostly use halogen lamps, which have low luminous efficiency, relatively power consumption, increased temperature of the irradiated environment, and short service life. LED is far superior to traditional lighting products in terms of light-emitting principle, energy saving and environmental protection. Moreover, the unidirectionality of LED light forms a perfect support for the light distribution of the wall lamp. Perfect support for light. The luminous efficiency of high-power LED wall lamps has exceeded 100 lm/W, and because the spectrum of LEDs is almost entirely concentrated in the visible light band, the luminous efficiency is far greater than that of incandescent lamps and is catching up with energy-saving lamps and fluorescent lamps. High quality of light: As there is no ultraviolet and infrared in the spectrum, there is no heat, no radiation, no burden on the human eyes, and no fading of many illuminated objects. Good color rendering: Compared with fluorescent lamps, high-power LED wall lights have a high color rendering index, usually around 80. The color of the illuminated object is better presented. Low maintenance cost: LED has a long life, the half-life life of luminous flux exceeds 50,000 hours, and it is generally used for more than 30 years. Strong shock and earthquake resistance, no tungsten wire, glass bulb and other easily damaged parts, the possibility of abnormal 'scrap' is very small. Small size: the lamp can be made small and exquisite, which is more suitable for different use places. At the same time, different arms can be installed to make the lamp light change abundantly.