How to reasonably match the configuration of solar street lights?

As a clean and environmentally friendly solar energy, it is an indispensable energy source for today’s society. Solar street lights, because of their low cost, long-term use, and ability to absorb heat and convert electricity, are not affected by power supply, and do not require labor and money. There are many characteristics such as buried trench and no pollution to the environment, so it is called green and environmentally friendly lighting products. Nowadays, most rural areas have been installed with solar street lights. If you want to configure solar street lights reasonably, you need to understand the light coefficient of the area, the width of the road surface and the height of the street lights, and choose the height of the pole and the brightness of the lamp head. Suitable, the power of each time period and the general number of cloudy and rainy days in this area should be suitable for the capacity of the battery, and the power of the solar panel should be suitable for the power storage of the maintenance-free battery. The following three points are summarized by our solar street light manufacturers:

1. Reasonably choose the power of led street lamp head
If the power used by the LED street lamp head is too large, then the battery may be aging early due to over-discharge. If the power is too small, the LED street lamp head will not have enough brightness and cause unnecessary cost waste. The probability of occurrence of this situation is relatively small. Therefore, we must carefully choose the power used when choosing LED street lamp heads.

2. Reasonable selection of battery capacity
When the solar street light is designed and configured, if the battery capacity is too small, which causes the brightness to decrease after the continuous rainy days exceed the days, it will be a problem that is more likely to occur during the continuous rainy days, which will bring the battery A huge burden.

3. Reasonable setting of solar street lamp controller time
When the number of local cloudy and rainy days exceeds the setting of the controller, it will bring a huge burden to the battery, resulting in premature aging of the battery, reduced life and other damage. Therefore, when setting up the controller, we must carefully and accurately consider the number of local cloudy and rainy days.

Fourth, set the size of solar panels reasonably
When the solar street light is designed and configured, the power of the battery panel is small, which may cause the battery to be unsatisfactory. The performance was normal at the beginning of use, but after several rainy days, the light began to dim, and it was all in less than a year It turns into darkness, which is more common. Therefore, when we configure the battery panel, the selected power must be appropriate.

In short, the purchase of solar street lights must be based on the actual situation and actual needs of your own area. Of course, consulting a professional solar street light manufacturer is the best way.