The world is advocating green new energy lighting. Traditional high-pole lighting is gradually being replaced by LEDs. At this stage, the light source has begun to change. High-power
LED street lamp heads are slowly replacing high-pressure sodium lamps.
The height of our conventional led high pole lights is generally from meters to meters. The height above the meter is divided into three sections, and the section below the meter is divided into two sections. There is a lamp panel and a lightning rod on the top. Because of the high height, it must be grounded. The lamp panel is generally It is fan-shaped or round. The rod type is generally hexagonal, octagonal or twelve-corner. The cone type is less difficult to roll, and the price is relatively high, which is not practical. Almost all customer requirements for spray color are pure white. Light source LED, commonly used specifications LEDW, W, W, etc. Configure multiple light sources according to lighting needs.
Parameter structure of led high pole light:
Light pole: material Q steel; anti-corrosion adopts hot-dip galvanizing treatment;
Light pole connection: docking type;
Light pole design: wind pressure resistance.kpa.
Lamp panel: The material is Q hot-dip galvanized steel frame; the lighting range can reach M.
Lamps: The lamp is equipped with aluminum die-casting shell, toughened glass light cover, protection grade IP;
Light source: Use LED flood light with long life, high efficiency and low energy consumption.
Lifting mechanism: The lift is installed in the light pole, and the lifting speed is .m/min-m/min; the mechanical limit device is equipped with a torque protection device, and the machine can be lifted by hand when the power is off.
Electrical control: The electrical box is placed in the high pole lamp door, and the lifting operation is controlled by the button box at a distance of meters away from the lamp pole; time-space or light control can be designed to achieve full-load lighting and partial lighting.
High pole lamp series
